How To Fix Samsung Smart TV Error Code 107 – Here’s The Simple Steps In 2022

How To Fix Samsung Smart TV Error Code 107: Your internet connection is unstable while you are watching TV. Samsung Tv Error Code 107 Occurred due to internet error or connection time failure. Sometimes the TV loses the smart hub connection. In general, the Samsung TV error code 107 indicates that the smart hub will not work without internet connectivity. An error message will appear on the notification screen when there is an internet problem.

Samsung offers quality TVs and monitors with impressive displays. However, not everything is perfect. The term, Samsung Tv Error Code 107, refers to the OpenAPI issue. It’s a slow or unstable internet connection and not working smart though is a concern. Error code 107 is usually caused when multiple users are connected to the same network. In this article, we are going to explain what is Samsung TV Error 107 and how you can easily fix it.

How To Fix Samsung Smart TV Error Code 107?

There are several reasons behind the error 107 problems. Therefore, you should follow the next instructions to fix the error.

  • Check your Internet Connection
  • Check TV Settings
  • Factory Reset Tv
  • System Update
  • Power Cycle Tv and Router
  • Contact the Service Provider

1. Check your Internet Connection:

Check your Internet Connection

First of all, you require to make sure that your internet connection is functioning correctly. You can check the internet speed on your other device like a mobile or your laptop. Additionally, you can restart your router to resolve internet speed issues.

Also, check that the configuration of your router is not incorrect. If your router setup is incorrect, fix it first, and then try watching TV.

You can change the following settings on your router to resolve the error 107:

  • Network channel
  • Also enter the DNS, manual IP address, subnet mask, and other settings.
    However, the router problem is much less likely. So, if it does not work, follow the next instructions.

2. Check TV Settings:

Check TV Settings

Sometimes, the wrong settings on your TV can cause the wrong code 107. Follow these steps:

  • Open the Settings menu.
  • Navigate to the support section.
  • Click the Self-Confirm item and open it.
  • Click Reset.
  • Enter the zip code (0000) here.
  • Reconnect Wi-Fi.
  • Now, check for the problem, and fix or. If the error still appears, eventually you will need to perform a non-recommended reset.

3. Factory Reset Tv:

Factory Reset Tv

Basically, a factory reset on a Samsung tv removes every setting and restores the default setting. Lost TV network configuration, installed your apps, and synced accounts. Samsung Tv Factory Reset Instructions:

  • Navigate to Settings, and then select Support.
  • Choose self-confirmation.
  • Select Reset from self-confirmation.
  • Enter your PIN (0000).
  • Confirm the reset by selecting Yes.
  • Finally, the TV will be completely reset and rebooted again. After completing the initialization process, enter the WiFi password to gain Internet access. Now, you can relax all the time and watch your favorite movie.

4. System Update:

System Update

The older version of the firmware had bugs and glitches. To fix these issues, new updates have been provided. The latest software solves the whole problem and also offers new features. Many users are complaining that error code 102 comes after updating to the 1303, 1169 version. If you have that version installed, please update it. That version included network bugs that prevented an Internet connection. Follow the instructions to update Samsung Tv:

  • Toggle Settings and then select Support.
  • Select Software Update, and then select Update Now.
  • Samsung TV error code 107
  • Now, the update will start downloading. Complete the update by following the instructions. Check if error 107 occurs after the update. You can also turn on Auto Update by selecting Auto Update to turn off or turn on Auto Update. Now the TV will update itself when a new update is needed.

5. Power Cycle Tv and Router:

Power Cycle Tv and Router

Sometimes the functions of the TVs do not work properly. However, a simple bug that does not work due to a restart can be easily fixed.


  • Turn off the TV by clicking the power button on your remote.
  • Now, switch it off, and then unplug the power cord from the wall socket.
  • Wait a few seconds.
  • Plug in the power cord, and then turn on the switch.

Router / Modem:

  • Now, switch it off, and then unplug the power cord from the wall socket.
  • Wait a few seconds.
  • Plug in the power cord, and then turn on the switch.
  • Now, you have to stay for 5 or 10 minutes. Check if the error code is fixed.

6. Contact the Service Provider:

Contact the Service Provider

There may be a problem with any part of your device. Therefore, you should contact the service provider. They will take a look at your Samsung smart TV problem and fix it.


In conclusion, Samsung Tv Error Code 107 is an internet problem. More stable internet fewer internet errors on your TV. We look forward to helping others by sharing guides. If these methods help solve your problem.

Get real time updates directly on you device, subscribe now.

Leave A Reply

Your email address will not be published.

This site uses Akismet to reduce spam. Learn how your comment data is processed.

This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Accept Read More